User Tools

Site Tools


products:ict:communications:courses:cisco:ccna:overview_of_ipv6_addressing

IPv6 (Internet Protocol version 6) addressing is the next-generation IP addressing scheme designed to replace IPv4 due to the exhaustion of IPv4 addresses. IPv6 offers several improvements over IPv4, including a significantly larger address space, simplified header structure, and built-in support for features such as auto-configuration, mobility, and security. Here's an overview of IPv6 addressing:

### IPv6 Address Structure: - IPv6 addresses are 128 bits long, represented in hexadecimal format, and are typically written as eight groups of four hexadecimal digits separated by colons (e.g., 2001:0db8:85a3:0000:0000:8a2e:0370:7334). - Leading zeros within each group can be omitted, and consecutive groups of zeros can be represented by double colons (::) once within an address, simplifying address notation (e.g., 2001:db8::1). - IPv6 addresses are divided into two main parts: the network prefix and the interface identifier (host portion). - The network prefix identifies the network portion of the address and is assigned by an Internet registry or Internet service provider (ISP). - The interface identifier uniquely identifies a device on the network segment and can be assigned manually, derived from the MAC address (EUI-64), or generated through other means.

### Address Types: 1. Global Unicast Address:

  1. Equivalent to IPv4 public addresses, global unicast addresses are routable on the IPv6 Internet.
  2. Assigned to individual interfaces and used for communication between devices across different networks.

2. Link-Local Address:

  1. Similar to IPv4 link-local addresses (169.254.0.0/16), link-local addresses are automatically configured on each interface and are used for communication within the same network segment (link).
  2. Link-local addresses always start with the fe80::/10 prefix.

3. Unique Local Address (ULA):

  1. Similar to IPv4 private addresses (RFC 1918), ULA addresses are used for local communication within an organization's private network.
  2. ULA addresses are not routable on the global Internet and provide internal addressing space.

4. Multicast Address:

  1. Used for one-to-many communication, multicast addresses are used to send packets to multiple devices simultaneously.
  2. IPv6 multicast addresses begin with the prefix ff00::/8.

5. Anycast Address:

  1. Anycast addresses are assigned to multiple interfaces, but packets are routed to the nearest (best) interface based on routing metrics.
  2. Anycast addresses are used for load balancing and redundancy in network services.

### Address Assignment: - IPv6 addresses can be assigned manually, through stateless auto-configuration (SLAAC), or using DHCPv6 (Dynamic Host Configuration Protocol for IPv6). - SLAAC allows devices to automatically configure their IPv6 addresses using information from router advertisements (RA) without requiring a DHCPv6 server. - DHCPv6 can be used to provide additional configuration parameters beyond address assignment, such as DNS server addresses and domain information.

### Transition Mechanisms: - Various transition mechanisms exist to facilitate the coexistence of IPv4 and IPv6 networks, including dual-stack, tunneling (e.g., 6to4, Teredo), and translation (e.g., NAT64, DNS64) techniques.

Overall, IPv6 addressing offers a scalable and flexible addressing scheme to accommodate the growing number of devices and services on the Internet while providing improved functionality and security compared to IPv4.

products/ict/communications/courses/cisco/ccna/overview_of_ipv6_addressing.txt · Last modified: 2024/04/01 00:04 by wikiadmin