Transmission Control Protocol (TCP) is a core protocol of the Internet Protocol Suite, responsible for providing reliable, ordered, and error-checked delivery of data between applications running on hosts communicating over an IP network. Here's a detailed breakdown of the TCP packet format:

1. **Source Port (16 bits)**:
   - Identifies the sending port on the sender's device.

2. **Destination Port (16 bits)**:
   - Identifies the destination port on the receiver's device.

3. **Sequence Number (32 bits)**:
   - Used to ensure ordered delivery of data segments and to detect missing segments.

4. **Acknowledgment Number (32 bits)**:
   - If the ACK flag is set, this field contains the next sequence number that the sender of the segment is expecting to receive. This acknowledges receipt of all prior bytes (if any).

5. **Data Offset (4 bits)**:
   - Specifies the size of the TCP header in 32-bit words. This indicates where the data begins.

6. **Reserved (6 bits)**:
   - Reserved for future use. Must be zero.

7. **Flags (6 bits)**:
   - The 6 control flags:
     - **URG (Urgent Pointer Valid)**: Indicates the Urgent pointer field is significant.
     - **ACK (Acknowledgment)**: Indicates that the Acknowledgment field is significant. All packets after the initial SYN packet sent by the client should have this flag set.
     - **PSH (Push Function)**: Asks to push the buffered data to the receiving application.
     - **RST (Reset Connection)**: Resets the connection.
     - **SYN (Synchronize Sequence Numbers)**: Initiates a connection.
     - **FIN (Finish Connection)**: Indicates the sender is finished with the current session.

8. **Window Size (16 bits)**:
   - Indicates the size of the receive window in bytes. This tells the sender how much data the receiver is willing to accept.

9. **Checksum (16 bits)**:
   - Used for error-checking of the header and data. Calculated from the pseudo-header, TCP header, and data.

10. **Urgent Pointer (16 bits)**:
    - If the URG flag is set, this field points to the sequence number of the byte following the urgent data. This field is only significant if the URG flag is set.

11. **Options**:
    - Options may be present or absent depending on the value of the Data Offset field.
    - Common options include Maximum Segment Size (MSS), Window Scale, Selective Acknowledgment (SACK), Timestamps, etc.

12. **Padding**:
    - If the length of the options is not a multiple of 32 bits, padding is added to ensure that the header is a multiple of 32 bits in length.

13. **Data**:
    - The payload of the TCP segment, containing the actual data being transmitted.

TCP operates at the transport layer of the OSI model, providing reliable, connection-oriented communication between hosts. Its reliability is achieved through sequence numbers, acknowledgments, and retransmissions in case of packet loss or corruption.