Muftasoft TM

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
CRC (Cyclic Redundancy Check) is a type of error-detecting code used in digital communication and data storage systems to detect accidental changes to raw data. It's widely used in communication protocols like Ethernet, Wi-Fi, Bluetooth, and in storage systems like hard drives and memory cards.

Here's how CRC works:

1. **Data Representation**: The data to be transmitted is represented as a sequence of bits.

2. **Polynomial Division**: CRC is based on polynomial division. A generator polynomial is chosen, and the data bits are treated as coefficients of a polynomial. This polynomial is then divided by the generator polynomial using modulo-2 division (binary division with no carry).

3. **Checksum Calculation**: The remainder obtained from the polynomial division is the CRC checksum. This checksum is added to the data being transmitted.

4. **Transmission**: The data along with the CRC checksum is transmitted.

5. **Verification**: At the receiver end, the received data and CRC checksum are passed through the same polynomial division process. If the remainder obtained is zero, it suggests that no errors were detected during transmission. If the remainder is non-zero, it indicates that errors might have occurred during transmission.

Key characteristics of CRC:

- **Error Detection**: CRC can detect most common types of errors, including single-bit errors, burst errors, and some multiple-bit errors.
- **Efficiency**: CRC is computationally efficient and provides good error-detection capabilities with relatively small overhead.
- **Performance**: The effectiveness of CRC depends on the choice of generator polynomial. Different polynomial lengths and coefficients offer different levels of error-detection capability.

CRC is widely used in digital communication systems because of its simplicity, efficiency, and effectiveness in detecting errors. It's often used in conjunction with other error correction techniques, such as retransmission protocols (ARQ), to ensure reliable data transmission over unreliable channels.